Rebuilt
82/70 Pinspotters
If
you are looking to replace your 82/30 pinspotters or Brunswick
pinsetters we can help. Maybe your current 82/70 pinspotters have
become a maintenance nightmare because of high parts and labor
costs.
We
can help, we have a large supply of rebuilt 82/70 pinspotters.
We
offer 3 different levels of rebuilt pinspotters.
“Economy”
– “Deluxe” – “Superior”
Our
Economy Pinspotter
Is pressure washed clean and tested for proper operation. All
motors and chassis’s are tested.
Any badly worn belts are replaced. Mini PBL kits and new distributor
belts are included
Each pinspotter comes with a $500 parts credit to replace any
badly worn parts.
****These
pinspotters are sold “AS-IS” and come with NO Warranty****
The customer should understand that this pinspotter will require
some maintenance to get it operating properly. This is why we
include a parts credit.
“Our Deluxe Pinspotter”
Factory Certified technicians clean each pinspotter from top to
bottom.
All missing, broken or badly worn parts are replaced.
All carpets, distributor, and PBL drive belts are replaced.
All chassis’s have micro processor capabilities.
Mini PBL kits are included.
Front
End: Tables, bin assembly’s, sweep assembly’s are
inspected and any badly worn or broken parts are replaced. C1
and C2A plugs are inspected and repaired as needed. Each front
end is tested for proper operation before shipping.
Back End: New pit carpets are installed. Pit support brackets,
bounce plates, front and rear roller hangers, are inspected and
any broken or badly worn parts are replaced. Front and rear rollers
are inspected and greased. Plows, ring tubes, ring tube rollers,
are inspected and repaired as needed. Cushion assembly’s
are inspected and any badly worn or broken parts are replaced.
Each backend is tested for proper operation before shipping.
Chassis’s: C1 and C2A plugs are inspected and any damaged
pins are replaced, all missing guide pins and clips are replaced.
Table and Sweep contactors are inspected any badly worn or damaged
contactors are replaced. All chassis’s are then tested for
proper operation.
Motors:
All motors are cleaned and the seals, spline gear, and or output
shafts are inspected any damaged parts are changed. Stator windings
are inspected for broken or damaged wires. Overload klixons are
inspected and replaced as needed. Motor switches are inspected
and replaced as needed. Gear lube is replaced in all motors.
Distributors: Distributor belt is replaced. Clutch assembly is
taken apart, cleaned and inspected. Carriage, trip arm, eccentric
rollers, and orientation pan are inspected. Any badly worn parts
are replaced and the distributor is adjusted and tested for proper
operation.
Ball Lift: Upper and lower bearings are greased, and inspected,
any badly worn or broken parts are replaced. Clutch assembly’s
are lubed and inspected for proper operation.
Warranty:
All pinspotters have a 60 day warranty on all parts and a 6 month
warranty on ‘Motors, Gearboxes, and Chassis’ from
date of installation.
“Our
Superior Pinspotter”
This pinspotter has all of the same features of our "Deluxe Pinspotter"
Plus the addition of an XLi upgrade kit from QubicaAMF. This upgrade kit
includes New Motors, New Gearboxes, New Chassis's and New Wiring.
Plus a 6 month warranty on all parts and 1 year warranty on Motors,
Gearboxes, and Chassis's.
Additional upgrades available Durabins, Gripper Upsweeps, Light Ball
Sensors.
